Coating Thickness Gauge

Micronstat

Micronstat

Micronstat: Digital Coating Thickness Gauge

Micronstat is an electronic digital gauge for accurate measurement of coating thickness. It can measure thickness as fine as 1 micron, eliminating the need for guess work, erroneous reading and approximation in coating thickness measurement.

Micronstat can help to maintain consistent quality of coatings in the fields of anti-corrosion, electroplating, painting of engineering products, automobiles, aircraft manufacture, and chemical industry and so on.

Micronstat measures following coatings on metallic substrates:

Paint, varnish, lacquer, oxide, nitrite phosphate, enamel, plastic, fibre glass, rubber glass etc.
Decorative and protective coatings
Electroplating on steel (except nickel)
Anodizing, paints etc. on Aluminium
Plastic, Polyester films, Copper, Aluminium, foil thickness measurement by providing a temporary base like a plate or a roller

Download Brochure

Technical Details

	Micronstat
Memory	All statistical results, last reading, calibration setting
Output	mPrint or Centronics 8 / RS-232 interface
Battery	Standard 9V battery
Operating Temperature	0° to 50°C
Dimensions (mm)	145 x 80 x 42
Weight	250 grams

Probe Specifications

		FD Probe	ND Probe
Principle		Electromagnetic Induction	Eddy Current
Application		Non-magnetic coatings on magnetic base (Iron / Steel etc.)	Insulating / non-conductive coatings on non-ferrous base (Stainless Steel, Copper, Aluminium etc.)
Range		0 to 1250 microns
Resolution < 10 microns		± 0.1 micron	± 1 micron
Resolution > 10 microns		± 1 micron	± 1 micron
Tolerance (microns) 0 – 33 33 – 150 > 150		1% ± 1 1% ± 2 1.5% ± 1	1.5% ± 1 1.5% ± 2 2% ± 2
Substrate		0.5 mm Minimum Thickness
Measuring Area		7 mm Diameter	10 mm Diameter
Minimum Radius of Curvature	Convex	5 mm	10 mm
Minimum Radius of Curvature	Concave	20 mm	30 mm
Dimensions (mm)		OD 15 x 55 (H)	OD 17 x 70 (H)
Weight		40 grams	65 grams

Download Brochure

Products